BOUNTY: 10,000 UAH for one verified

wing, canopy, or fuselage

part from each drone (ZALA Lancet, ZALA Z16, Orlan-10, Super Cam 350, Shadhed, Molyna, Gerbera Decoy, Parody)

We’re offering 10,000 UAH for one verified physical part — specifically a wing, canopy, or fuselage section — from each of the drones listed below.

We will remove drones from this list as their parts are claimed. Read carefully before submitting.

Accepted Drone Types

We are currently seeking parts from the following drones:

ZALA Lancet
ZALA Z16
Orlan-10
Super Cam 350
Shadhed
Molyna
Gerbera Decoy
Parody

Only the following parts qualify for the bounty:

Wing section (full or partial, clearly identifiable as part of the aircraft’s lift surface)
Canopy section (top body shell enclosing avionics or payload)
Fuselage section (main body shell, excluding internal electronics or detachable mounts)

Any other parts (motors, cameras, antennas, landing gear, etc.) will not be accepted.

Reward

✅ 10,000 UAH per verified and accepted part

Each drone model listed counts separately — you can earn up to 80,000 UAH total if you deliver one qualifying part from each of the eight listed drones.

Legal & Safety Requirements

By submitting, you confirm:

You legally possess the item and are authorized to transfer it.
The item’s transfer does not violate any export, arms control, or military recovery laws.
You can provide proof of origin or authorization upon request.

If you’re not sure about legality — don’t submit. We verify every item and will report any unlawful material.

Submission Instructions

To qualify, your submission must include:

Photos (minimum 3, clear and detailed):
- Photo A: The full part (wing, canopy, or fuselage section) on a flat surface with a ruler for scale.
- Photo B: Close-up of any serial numbers, markings, or distinctive features.
- Photo C: Caliper measurements (see below).
- Photo D (recommended): Finder ID verification or recovery site context photo.
Caliper Thickness Measurements:
- Take three separate readings at different points (e.g., center, edge, and near a mounting area).
- Include clear photos showing the caliper jaws in contact and the reading display.
- Record readings in millimeters with two decimals (e.g., 3.48 mm, 3.56 mm, 3.42 mm).
Submission Template:

— Drone type:
— Part type (wing / canopy / fuselage):
— Caliper readings (mm): reading 1 / reading 2 / reading 3
— Photos attached: [list filenames]
— Provenance: [where and how recovered]
— Contact: name / phone / email / city
— Payment method: [bank / Wise / cash]
— Declaration: “I declare I legally possess and may transfer this part.” (signed & dated)

Proof of Scale:

Include one extra image with a ruler or object of known size beside the part.

Caliper Measurement Protocol

Zero your caliper (photo proof required).
Measure three distinct points on the part.
Take close-up photos showing the caliper reading and location.
Label your photos (e.g., orlan10_fuselage_A.jpg, orlan10_fuselage_B.jpg, orlan10_fuselage_C.jpg).
Submit both photo and numeric values.

Verification & Payment

Step 1: Photo and data verification (within 48 hours).
Step 2: Legal and authenticity review.
Step 3: Shipment or pickup arranged (we cover verified shipping costs).
Step 4: Payment issued via your chosen method upon final acceptance.

Disqualification Triggers

Submitting non-wing/canopy/fuselage parts.
Missing or unclear caliper readings.
Fake, replica, or tampered items.
No proof of lawful ownership or origin.

Contact

Send your submission to: [email protected]

Subject: DRONE PART SUBMISSION — [Drone Name] — [Part Type] — [Your Name]

Final Notes

Follow the process exactly.

We only pay for verifiable wings, canopies, or fuselage sections with proper measurements and provenance.

No other parts will qualify.

We will update this post as drones are claimed.